Re: Parts Order and PCBs

[Daniel Sauer <dmsauer@xxxxxxx>]

You should also specify the Cu thickness of the board you plan to use.  This makes a difference during the board design stage, so that trace widths can be properly determined.

----- Original Message -----
From: "Andrew Meyer" <agmeyer@xxxxxxx>
To: cslc-fun-l@xxxxxxx, "pfrc-l" <pfrc-l@xxxxxxx>, lug-l@xxxxxxx
Sent: Wednesday, February 10, 2010 12:02:53 PM GMT -06:00 US/Canada Central
Subject: Parts Order and PCBs

Two things: 
1. I will be making an order to Digikey on Saturday. If you are interested in parts and are in Houghton, send me quantity and Digikey part number by 20:00 Saturday evening. Shipping will be split based on total contribution to order. 
2. I have the pricing list for PCB fabrication in the EERC: 
Single side Double side 
Small (up to 4"X3") $12 $22 
Medium $17 $27 
Large (up to 15"X17") $22 $32 

If you are interested in a board and are in Houghton, I will be putting together a bunch of my own boards onto a single submission and cutting them apart myself. Send me an Eagle brd file and the corresponding sch file by next week Saturday (2/20), and I will stitch them into my submission. Cost will be split by total board area used. Note that I will be submitting a double-sided board. 

-- 
Andrew G. Meyer 
agmlego@xxxxxxxxx 
"Both optimists and pessimists contribute to our society. The optimist invents the airplane and the pessimist the parachute."--Gil Stern