Nginx

nginx is a reverse proxy. This can be thought of as a router: you've got a lot of applications in your server. To handle the traffic, the router "cleanly" distributes the network traffic. nginx does the same thing. nginx has some really good tutorials out there. Don't like nginx? You can also use Apache.

Initial setup

nginx is a key program in every major distribution. Please simply look up "<your distro> nginx install" and run that command for your package manager.

Let's say you only want to return a single file: This is intentionally left blank., then in your /etc/nginx/nginx.conf configuration, you can add:

location / {
    return 200 'This is intentionally left blank.'
}

If that's all you want, don't use nginx; it'd be easier to write a single-lined Bash script to run a single page.

In /etc/nginx/nginx.conf, /etc/nginx/conf.d/*.conf and /etc/nginx/sites-enabled/* are included. Therefore, if you have a complicated set up, you can split up your configuration among multiple files.

To test your configuration, nginx -t will tell you what syntax is wrong if there happens to be any. For instance, some directives can't be certain areas.

A single domain

You own the domain example.com and you want to serve your amazing blog to the Internet. Create the file: /etc/nginx/conf.d/example.com.conf or /etc/nginx/sites-enabled/example.com.conf or just edit /etc/nginx/nginx.conf directly. You'll need to point your DNS records to the IP that nginx is running.

server {
    server_name example.com;
    root /var/www/html;
    index index.html;
    listen 80;
    listen [::]:80;
}

The server_name tells nginx to use only this domain. For example, when there are subdomains or multiple domains running on a single nginx instance, you'll want correctly get the right content corresponding to each domain.

The root directive tells nginx where to serve files. So, inside /var/www/html, you'll want to have an index.html file in there, or more. Everything inside /var/www/html will be served via nginx.

The index directive tells nginx that if someone goes to your website example.com, it will try to find index.html and serve that, without requiring the user to directly specify index.html.

The listen directive tells nginx from which ports to serve the files in the root directive. A single 80 is over IPv4, while [::]:80 is over IPv6.

Multiple domains

Say you want a blog, a forum, a wiki, a streaming service, etc. If you want each of these to be in different root folders to keep these neat:

server {
    root /var/www/blog;
    index index.html;
    server_name blog.example.com;
    listen 80;
    listen [::]:80;
}
server {
    root /var/www/phpbb;
    index index.html;
    server_name forum.example.com;
    listen 80;
    listen [::]:80;
}
server {
    root /var/www/mediawiki;
    index index.html;
    server_name wiki.example.com;
    listen 80;
    listen [::]:80;
}

Please note that you'll need php add-ons and more configurations to have phpbb and mediawiki to run, but this is just a basic example.

If you want to protect your server from people access your IP (typically if they're crawling via IPs, they're probably not up to something good), you can up a configuration:

server {
    listen 80;
    listen [::]:80;
    server_name _;
    return 444;
}

that rejects them.

Add-ons

nginx has modules added while it compiles. This makes adding these modules frustrating in the case of obscure modules on pre-compiled package managers, though the only two that should really matter are proxy to proxy any arbitrary code and fastcgi to proxy php-fpm.

proxy

I believe all nginx configurations default to include the proxy add-on, so there's no need to discuss how to install it (gentoo doesn't, follow this).

To use a reverse proxy, remember the port your service is running on, and then add it into your nginx configuration:

server {
    server_name example.com;
    listen 80;
    listen [::]:80;
    location / {
        proxy_pass http://localhost:8080;
    }
}

This is a simple set up for an executable running on port 8080. I would ensure your firewall does not allow outside access to these ports, else anyone can directly access the service without nginx's protection.

Suppose you want multiple webapps, then:

server {
    server_name example.com;
    listen 80;
    listen [::]:80;
    location / {
        proxy_pass http://localhost:8080; # Homepage
    }
    location /tags {
        proxy_pass http://localhost:8081; # Cool web app 1 
    }
    location /wiki {
        proxy_pass http://localhost:8082; # Cool web app 2
    }
    ...
}

If someone navigates to example.com, nginx serves them data from the service running on port 8080.

If someone navigates to example.com/tags, nginx serves them data from the service running on port 8081.

If someone navigates to example.com/wiki, nginx serves them data from the service running on port 8082.

Why's there no root or index? It doesn't matter. nginx no longer bothers with any of that, since it's directly passing everything into the service.

This shows the purpose of the location directive.

fastcgi

fastcgi lets you run php files.

php is not installed by default. You'll need to find the most recent php version, and install php7.4 php7.4-fpm or what happens to be the most recent php version. With systemd, systemd enable php7.4-fpm and systemd start php7.4-fpm will get you up and running.

To be honest, just look up nginx php ubuntu and you'll find a tutorial that steps you through installing each add-on required for Ubuntu.

In your nginx configuration, you'll need to set up:

server {
    listen 80;
    server_name example.com;
    root /var/www/;
    index index.php;
    location ~ \.php$ {
        try_files $uri = 404;
        fastcgi_pass unix:/var/run/php5-fpm.sock;
        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        include fastcgi_params;
    }
}

This allows any php file to be passed through the fastcgi module, which executes the php file in accordance to /etc/php/<version num>/fpm/php-fpm.conf (note that the bottom of php-fpm.conf includes pool.d/www.conf which is actually where the user configurations are set up).

The fastcgi_pass directive is equivalent to proxy_pass but for php. Why is php special? I don't know.

The fastcgi_index directive is equivalent to index.

The fastcgi_param directive passes in information into the fastcgi server. The rest of the params are inside /etc/nginx/fastcgi_params, which is only 20 or so more params.

We only want to run *.php files into the fastcgi server, so we want to make sure only files that end with .php are actually passed into the fastcgi server (note the location directive).

TLS

In order to get an https in your domain, you need to set up SSL (HTTPS = HTTP SSL), which is now changed to TLS. In nginx, running over https is simple:

server {
    listen 443 ssl;      # IPv4
    listen [::]:443 ssl; # IPV6
    # ... rest of configuration
}

If you've got a domain name (example.com), this won't get browsers happy. This configuration has an SSL connection, but it does not have a certificate yet. You can generate your own certificate using a self-signed certificate, but no one is going to trust this self-signed certificate.

Instead, we can use a free service, Let's Encrypt, Dehydrated, or ZeroSSL. Let's Encrypt is the most common, and is a straightforward set up.

apt install certbot python3-certbot-nginx

Once certbot is installed, ensure your domain is pointed to the correct nginx server, then run:

certbot --nginx -d example.com -d ...

Where you can keep chaining -d <domain> for each domain you have. python3-certbot-nginx will find the right nginx configuration to call, and certbot will make sure you've got rights to that domain. You can't just run certbot on google.com, you need to own the domain and the IP that domain is connected to. At this point, python3-certbot-nginx should have edited your nginx configuration to have certbot's certificate auto-configured. If you force https, you'll see:

1  server {
2      listen 443 ssl;
3      listen [::]:443 ssl;
4      ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
5      ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
6      include /etc/letsencrypt/options-ssl-nginx.conf;
7      ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem;
8      root /var/www;
9  }
10 server {
11     if ($host = example.com) {
12         return 301 https://$host$request_uri;
13     }
14     listen 80;
15     listen [::]:80;
16     server_name example.com;
17     return 404;
18     root /var/www;
19 }

When you request example.com, you'll pass through the server starting on line 9, as specified by server_name on line 15.

You'll get redirected to the https version of example.com, specified by line 11, which sends you to the server starting on line 1.

These two servers are loading the same data, both are pointing to /var/www, but one runs http, while the other runs https.

The configurations in /etc/letsencrypt/options-ssl-nginx.conf and /etc/letsencrypt/ssl-dhparams.pem specify how SSL is used. The options-ssl-nginx.conf will give basic configurations, but more importantly which protocols are allowed (TLSv1.2 and TLSv1.3) and a list of ciphers that nginx will serve.

Let's Encrypt allows you to not redirect to https, which gives you:

server {
    listen 80;
    listen [::]:80;
    listen 443 ssl;
    listen [::]:443 ssl;
    ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;
    ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
    include /etc/letsencrypt/options-ssl-nginx.conf;
    ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem;
    root /var/www;
}

ACME

Automatic certificate management environment. Certificates expire after a period of time to prevent certificates being valid when your site or server has been dead for a long time.

Let's Encrypt is simple. Just run certbot renew and it'll renew your certificate.

Let's Encrypt's certificates are valid for 3 months, so you can update this every 3 months when it expires. Or, have a cronjob do it for you! Type crontab -e and then add:

0 12 * * * /usr/bin/certbot renew --quiet

Examples

You want to run a blog that hosts static pages and a wiki that runs mediawiki.