Docs/Switches

~/Docs

For Layer 1 network details, see Docs/Cables.

For Layer 3 network details, see Docs/OPNSense.

VLANs

Network	VLAN ID
Management	1
LAN	2
????	30
WAN	640

Switch Ports

Fiber switch:

Switch port	Client	Client port	VLAN 1 (Mgmt.)	VLAN 2 (LAN)	VLAN 30 (???)	VLAN 640 (WAN)
1	Shell		Excluded	Untagged	Excluded	Excluded
2	Storage		Excluded	Untagged	Excluded	Excluded
3	Mirrors		Excluded	Untagged	Excluded	Excluded
4	Kurisu		Excluded	Untagged	Excluded	Excluded
5	Okabe		Excluded	Untagged	Excluded	Excluded
6	Daru		Excluded	Untagged	Excluded	Excluded
7	Mayuri		Excluded	Untagged	Excluded	Excluded
8	Luka		Excluded	Untagged	Excluded	Excluded
9	Watch		Excluded	Untagged	Excluded	Excluded
10	N/A		Excluded	Untagged	Excluded	Excluded
11	ravioli	ix1 (left SFP)	Tagged	Tagged	Excluded	Excluded
12	lasagna		Tagged	Tagged	Excluded	Excluded
13	48 Port	Port 45	Tagged	Tagged	Excluded	Excluded
14	48 Port	Port 46	Tagged	Tagged	Excluded	Excluded
15	48 Port	Port 47	Tagged	Tagged	Excluded	Excluded
16	48 Port	Port 48	Tagged	Tagged	Excluded	Excluded

Ethernet switch:

WAN

Our WAN is a LAGG across two ports. The link needs LACP enabled ("Static mode" off in 1Gb Ubiquiti Switch) [1], and STP off.

IT configures their switches to automatically shut off ports if they detect STP advertisements.

Reference commands to make a Cisco switch satisfy the requirements:

(config-if)# spanning-tree bpdufilter enable
(config-if)# spanning-tree bpduguard disable