278
edits
Locked HGST drives: Difference between revisions
Jump to navigation
Jump to search
added problems 2 and 3 and fixed up a lot of stuff
(added hardware notes) |
(added problems 2 and 3 and fixed up a lot of stuff) |
||
|
These disks have three primary issues:
# They have Hitachi Vantara firmware [https://www.reddit.com/r/homelabsales/comments/qazb88/pccan_huc101212css600_12tb_10k_sas_6g_25_drives/hh6frb5/] that locks them to Hitachi VSP systems and doesn't let them work with normal servers.
# They have a lock preventing them from being reflashed with the Dell [https://www.dell.com/support/home/en-au/drivers/driversdetails?driverId=PJ9CD] firmware that would allow them to be used in generic systems.
== Problem 1: (520-byte sectors) ==
All you need is a "true" HBA in the server that is reformatting the disks. Dell PERC cards and HP Smart Array controllers cannot communicate with 520-byte sector disks whatsoever, even when put into "HBA mode".
The cards inside the [[Servers|Kurisu and Okabe]] servers have been flashed
The sector size of a disk can be reformatted to 512 bytes using <code>sg3utils</code> with the command below:
<code>sg_format -v --format --size=512 --six /dev/sgX</code>
Of note, formatting with the ten-byte variant of <code>
Netapp needs ten-byte, while our drives should need six-byte (based on a comment from someone in a ServeTheHome thread (find the link for this)
== Problem 2: (Hitachi VSP firmware) ==
The primary issue with these drives is the firmware that only allows them to work with Hitachi VSP systems.
They will experience I/O errors when used on a regular system, even after having been reformatted to 512-byte sectors.
Apparently it is related to the firmware only accepting <code>SCSI_WRITE_WITH_VERIFY</code> commands [https://
These exact physical drives are also sold as general consumer and OEM variants that work in generic systems without issue. The only difference between our drives and those drives is the differing firmware.
It should be possible to flash the firmware from the OEM-branded variants onto our drives to enable them to work.
== Problem 3: (Firmware lock) ==
In addition to the previous problem, the drives also have a lock that prevents rewriting the firmware.
The disks require a specific command be sent before they will allow overwriting the firmware.
There is a Russian dude who, for the price of ~$10/drive, will RDP into a Windows environment and flash the drives for you. [https://forum.hddguru.com/viewtopic.php?f=22&t=39927&sid=121a6e12d2d1fdaf816fe00eedac1745]
From what I've gathered, he runs a custom script he made that uses WD Niagara (an internal Western Digital tool intended OEMs for advanced HDD operations) to unlock the drives, then uses Niagara's built-in "firmware download" to flash the firmware.
Should we have the money, this is the easiest route to solve the problem. However, by that point, it makes more sense to just buy new drives.
He has uploaded a video of the process to YouTube [https://www.youtube.com/watch?v=mAhS_sk3wKE]
▲It is likely we won't know for sure which option to use until we unlock the firmware ourselves.
According to a Chinese dude who paid for Hydata SCSITools in another ServeTheHome thread, this program can also send the command to unlock the drives and flash the firmware.
SCSITools is $2800 for a license, so same as above, at that price it makes more sense to buy different drives.
SartenX recommended asking them for a free license as students, I doubt they'd hand out a free license though.
Preliminarily poking at the Windows program, the check for a license key seems really basic.
Smooth L7228: Drive Spindle controller?▼
It just pulls in <code>hasp_windows_102966.dll</code> which is the Sentinel HASP (Hardware Against Software Piracy) all-in-one check that looks for a valid USB hardware key plugged into the computer.
[https://www.ariat-tech.com/parts/samsung-semiconductor/K4T51163QJ-BCE7 Samsung K4T51163QJ-BCF8]: DDR2 memory▼
I doubt fiddling with Sentinel HASP would be easy, it has checks for VMs, emulated dongles, and even WINE for some reason, but the program itself could probably be modded to ignore the check.
LSI TNNKU873 BJR12034 - microcontroller▼
We also considered flashing the drives via the hardware, with a Pomona SOIP8 clip (SOIP8 is the same form-factor as SOP8)
There are pictures of the mainboard in this HDDGuru thread [https://forum.hddguru.com/viewtopic.php?p=292187]
We identified the following chips on the drive's mainboard:
▲* Smooth L7228: Drive Spindle controller?
▲* [https://www.ariat-tech.com/parts/samsung-semiconductor/K4T51163QJ-BCE7 Samsung K4T51163QJ-BCF8]: DDR2 memory
* MAXIC 25U40325 M1-126: the SOP8 ROM (this is the big one)
Apparently only disk-specific calibration information is stored on the ROM and not the actual firmware.
^ (Josh found a post from someone trying to do exactly what we planned, and came to this conclusion. Post forum link here)
So the hardware route is a dead-end :(
▲https://www.reddit.com/r/DataHoarder/comments/7raoz8/firmware_for_hgst_10k_sas_huc109090css600/
| |||